<%NUMBERING1%>.<%NUMBERING2%>.<%NUMBERING3%> PRTG Manual: SNMP Cisco UCS System Health Sensor

The SNMP Cisco UCS System Health sensor monitors the system health of a Cisco Unified Computing System (UCS) device via the Simple Network Management Protocol (SNMP).

SNMP Cisco UCS System Health Sensor

SNMP Cisco UCS System Health Sensor

i_square_cyanFor a detailed list and descriptions of the channels that this sensor can show, see section Channel List.

Sensor in Other Languages

  • Dutch: SNMP Cisco UCS Systeemstatus
  • French: Cisco UCS état du système (SNMP)
  • German: SNMP Cisco UCS Systemzustand
  • Japanese: SNMP Cisco UCS システムの正常性
  • Portuguese: Funcionamento do sistema Cisco UCS (SNMP)
  • Russian: Работоспособность системы SNMP Cisco UCS
  • Simplified Chinese: SNMP Cisco UCS 系统健康状况
  • Spanish: Salud de sistema Cisco UCS (SNMP)

Remarks

  • This sensor supports IPv6.
  • This sensor has a medium performance impact.
  • This sensor uses lookups to determine the status values of one or more channels.

Basic Sensor Settings

Basic Sensor Settings

Basic Sensor Settings

Setting

Description

Sensor Name

Enter a name to identify the sensor. By default, PRTG shows this name in the device tree, as well as in alarms, logs, notifications, reports, maps, libraries, and tickets.

i_round_blueIf the name contains angle brackets (<>), PRTG replaces them with braces ({}) for security reasons. For more information, see the Knowledge Base: What security features does PRTG include?

Parent Tags

The tags that the sensor inherits from its parent device, parent group, and parent probe.

i_round_blueThis setting is for your information only. You cannot change it.

Tags

Enter one or more tags. Confirm each tag with the Spacebar key, a comma, or the Enter key. You can use tags to group objects and use tag-filtered views later on. Tags are not case-sensitive. Tags are automatically inherited.

i_round_blueIt is not possible to enter tags with a leading plus (+) or minus (-) sign, nor tags with parentheses (()) or angle brackets (<>).

i_round_blueFor performance reasons, it can take some minutes until you can filter for new tags that you added.

The sensor has the following default tags that are automatically predefined in the sensor's settings when you add the sensor:

  • snmpciscosystemhealthsensor
  • systemhealth
  • ucssystemhealth
  • ucs

Priority

Select a priority for the sensor. This setting determines the position of the sensor in lists. The highest priority is at the top of a list. Choose from the lowest priority (i_priority_1) to the highest priority (i_priority_5).

Sensor Display

Sensor Display

Sensor Display

Setting

Description

Primary Channel

Select a channel from the list to define it as the primary channel. In the device tree, the last value of the primary channel is always displayed below the sensor's name. The available options depend on what channels are available for this sensor.

i_round_blueYou can set a different primary channel later by clicking b_channel_primary below a channel gauge on the sensor's Overview tab.

Graph Type

Define how different channels are shown for this sensor:

  • Show channels independently (default): Show a graph for each channel.
  • Stack channels on top of each other: Stack channels on top of each other to create a multi-channel graph. This generates a graph that visualizes the different components of your total traffic.
    i_round_redYou cannot use this option in combination with manual Vertical Axis Scaling (available in the channel settings).

Stack Unit

This setting is only visible if you select Stack channels on top of each other above.

Select a unit from the list. All channels with this unit are stacked on top of each other. By default, you cannot exclude single channels from stacking if they use the selected unit. However, there is an advanced procedure to do so.

Inherited Settings

By default, all of these settings are inherited from objects that are higher in the hierarchy. We recommend that you change them centrally in the root group settings if necessary. To change a setting for this object only, click b_inherited_enabled under the corresponding setting name to disable the inheritance and to display its options.

i_square_cyanFor more information, see section Inheritance of Settings.

Scanning Interval

Scanning Interval

Scanning Interval

i_square_cyanFor more information, see section Root Group Settings, section Scanning Interval.

Schedules, Dependencies, and Maintenance Window

i_round_blueYou cannot interrupt the inheritance for schedules, dependencies, and maintenance windows. The corresponding settings from the parent objects are always active. However, you can define additional schedules, dependencies, and maintenance windows. They are active at the same time as the parent objects' settings.

Schedules, Dependencies, and Maintenance Window

Schedules, Dependencies, and Maintenance Window

i_square_cyanFor more information, see section Root Group Settings, section Schedules, Dependencies, and Maintenance Window (default).

Access Rights

Access Rights

Access Rights

i_square_cyanFor more information, see section Root Group Settings, section Access Rights.

Channel Unit Configuration

i_round_blueWhich channel units are available depends on the sensor type and the available parameters. If no configurable channels are available, this field shows No configurable channels.

Channel Unit Configuration

Channel Unit Configuration

i_square_cyanFor more information, see section Root Group Settings, section Channel Unit Configuration.

Channel List

i_round_blueWhich channels the sensor actually shows might depend on the target device, the available components, and the sensor setup.

Channel

Description

Critical Faults Count

The number of critical faults (that are not yet acknowledged in the UCS logs)

i_round_blueThis channel has a default limit

  • Upper error limit: 0.5

Downtime

In the channel table on the Overview tab, this channel never shows any values. PRTG uses this channel in graphs and reports to show the amount of time in which the sensor was in the Down status

Fan Failure Predicted

The predicted fan failure status

  • Up status: No, Not Available
  • Down status: Yes

Fan Module Failure Predicted

The predicted fan module failure status

  • Up status: No, Not Available
  • Down status: Yes

Fan Module Performance

The fan module performance status

  • Up status: Ok
  • Warning status: Lower Non Critical, Upper Non Critical
  • Down status: Lower Critical, Lower Non Recoverable, Upper Critical, Upper Non Recoverable
  • Unknown status: Not Supported, Unknown

Fan Module Thermal

The fan module thermal status

  • Up status: Ok
  • Warning status: Lower Non Critical, Upper Non Critical
  • Down status: Lower Critical, Lower Non Recoverable, Upper Critical, Upper Non Recoverable
  • Unknown status: Not Supported, Unknown

Fan Modules Inoperable

The number of operable fan modules

i_round_blueThis channel has a default limit

  • Upper warning limit: 0.5

Fan Modules Operable

The number of inoperable fan modules

Fan Performance

The fan performance

  • Up status: Ok
  • Warning status: Lower Non Critical, Upper Non Critical
  • Down status: Lower Critical, Lower Non Recoverable, Upper Critical, Upper Non Recoverable
  • Unknown status: Not Supported, Unknown

Fan Thermal

The fan thermal status

  • Up status: Ok
  • Warning status: Lower Non Critical, Upper Non Critical
  • Down status: Lower Critical, Lower Non Recoverable, Upper Critical, Upper Non Recoverable
  • Unknown status: Not Supported, Unknown

Fans Inoperable

The number of inoperable fan modules

i_round_blueThis channel has a default limit

  • Upper warning limit: 0.5

Fans Operable

The number of operable fan modules

i_round_blueThis channel is the primary channel by default.

Major Faults Count

The number of major faults (that are not yet acknowledged in the UCS logs)

i_round_blueThis channel has a default limit

  • Upper error limit: 0.5

Minor Faults Count

The number of minor faults (that are not yet acknowledged in the UCS logs)

i_round_blueThis channel has a default limit

  • Upper warning limit: 0.5

Power Supplies Inoperable

The number of inoperable power supplies

i_round_blueThis channel has a default limit

  • Upper warning limit: 0.5

Power Supplies Operable

The number of operable power supplies

Power Supply Failure Predicted

The predicted power supply failure status

  • Up status: No, Not Available
  • Down status: Yes

Power Supply Performance

The power supply performance status

  • Up status: Ok
  • Warning status: Lower Non Critical, Upper Non Critical
  • Down status: Lower Critical, Lower Non Recoverable, Upper Critical, Upper Non Recoverable
  • Unknown status: Not Supported, Unknown

Power Supply Thermal

The power supply thermal status

  • Up status: Ok
  • Warning status: Lower Non Critical, Upper Non Critical
  • Down status: Lower Critical, Lower Non Recoverable, Upper Critical, Upper Non Recoverable
  • Unknown status: Not Supported, Unknown

Power Supply Voltage

The power supply voltage status

  • Up status: Ok
  • Warning status: Lower Non Critical, Upper Non Critical
  • Down status: Lower Critical, Lower Non Recoverable, Upper Critical, Upper Non Recoverable
  • Unknown status: Not Supported, Unknown

Warning Count

The number of warnings (that are not yet acknowledged in the UCS logs)

i_round_blueThis channel has a default limit

  • Upper warning limit: 0.5

More

i_square_blueKNOWLEDGE BASE

What security features does PRTG include?

My SNMP sensors don’t work. What can I do?